Vol. 38 (2025): Early Publication - Continues

Articles

• Recycling of Ceramic Tile Waste in the Formulation of Self-Compacting Concrete

  Rabehi Bahia, Ghernouti Youcef, Mansour Sabria Malika, Boumchedda Khaled (Author)

  1-11

  • pdf

• Electromagnetic Interference (EMI) in Variable-Speed AC Electric Drives: Mechanisms and Solutions

  Houcine Miloudi, Mohamed Miloudi, Mohammed Hamza Bermaki, Kheira Mendaz, Abdelkader Gourbi, Abdelber Bendaoud (Author)

  12-19

  • pdf

• Stock Price Forecasting Model Using Short Cross Association of Logical Fuzzy Relations in Fuzzy Time Series

  Fitri Cahyani, Akhmad Sultoni, Chyntia Meininda Anjanni (Author)

  20-29

  • pdf

• Numerical Modeling Creep of Two Piles Under Constant Static Loading Using ANSYS

  Ghouilem Kamel, Belmihoub Hacene (Author)

  30-39

  • pdf

• Sliding Neural Artificial Controller of Induction Motor Combined with NPC Five Level Inverter

  Mendaz Kheira, Miloudi Houcine, Khadraoua Narimene (Author)

  40-46

  • pdf

• Development of High-Frequency Power Source Utilizing Electronic Ballast by Employing a Half-Bridge Inverter for Water Purification

  Aicha Aissa-Bokhtache, Maamar Latroch, Taieb Bessaad, Alla Eddine Toubal-Maamar, Lemya Djafer, Amina Merini (Author)

  47-55

  • pdf

• Robust Nonlinear Control of a 3×2 Stacked Multicellular Inverter Using Neural Network-Based Regulation

  Salah Hanafi, Mohammed Karim Fellah, Youcef Djeriri, Mohamed Fouad Benkhoris, Abdelhakim Saim, Djamel Ziane, Patrice Wira (Author)

  56-68

  • pdf

• Development of a Relation Model for Damage Categorization

  Akkouche Karim, Khelil Nacim, Nekmouche Aghiles, Kahil Amar, Hamizi Mohand, Bouzid Leyla, Atlaoui Djamel (Author)

  69-80

  • pdf

• Investigation of Conducted Electromagnetic Disturbances in Power Electronics: A Case Study on DC/DC Choppers

  Mohammed Elamine Lahlaci, Mohamed Miloudi, Houcine Miloudi, Mohammed Hamza Bermaki, Kheira Mendaz, Abdelkader Gourbi (Author)

  81-89

  • pdf

• Fire Risk Simulation of Photovoltaic Panels Installed in Green Buildings

  Miloua Hadj, Hassan Sandous, Miloua Farid (Author)

  90-101

  • pdf

• Development and Optimization of a Mathematical Model for Predicting Tensile Strength in Friction Stir Welded Joints of 6082-T6 Aluminum Alloy

  Ben Messaoud Mohammed Abdelghani, Cherief Mohammed Nadhir Djamel Eddine, Miloudi Abdelkader, Belaribi Amina (Author)

  102-108

  • pdf

• Study of the Thermomechanical Properties of Bimaterials (Metal/Ceramic)

  Liamani Samira, Ghermaoui Ilas Mohamed Amine (Author)

  109-114

  • pdf

• Numerical Analysis of Weld Spot Spacing Effects on Shear Tensile Behavior of TRIP 800 Steel

  Cherfi Mohamed, Reffas Sid Ahmad, Sahli Abderahmane, Moulgada Abdelmajid, Ghermaoui Mohammed Ilyes (Author)

  115-120

  • pdf

• Performance Improvement of Predictive Direct Power Control of a Unified Power Quality Conditioner

  Noureddine Khenfar, Abdelhafid Semmah (Author)

  121-134

  • pdf

• Experimental Study of a Cylindrical Electrostatic Precipitator with Real-Time Monitoring Applied to Simulated Smoke

  Miloua Farid, Redjala Majda, Miloua Hadj, Rezoug Mohammed (Author)

  135-142

  • pdf

• Aeolian Sands in Self-Consolidating Mortar Formulations: Study of the Mechanical Impacts

  Nacim Khelil, Said Boukais, Karim Akkouche, Amar Kahil, Djamal Atlaoui, Randa Makkeb (Author)

  143-150

  • pdf

• On LDPC Codes and Their Construction

  Mohammed Amine Tehami, Malika Tehami, Boucif Beddad, Ahmed Hadji (Author)

  151-158

  • pdf

• Magnetic, Structural and Morphological Properties of Mechanically Alloyed FeSi and FeSiO₂ Nanocomposites

  Abderrahmane Younes, Rachid Amraoui, Abderahim Abada, Djilali Allou (Author)

  159-165

  • pdf

• Optimizing Cost and Performance of Hybrid Photovoltaic-Diesel Systems for Off-Grid Energy Solutions

  Samir Hadjeri, Halima Boubekeur, Salah Hanafi, Mokhtaria Jbilou, Sid Ahmed Zidi, Rihab Belhabri (Author)

  166-171

  • pdf

• EOQ Based Inventory Optimization with Partial Backordering and Demand Uncertainty in Manufacturing

  Chyntia Meininda Anjanni, Fitri Cahyani, Akhmad Sultoni (Author)

  172-179

  • pdf

• Potential Use of Recycled Brick and Demolition Concrete Aggregates in the Self-Compacting Concrete

  Ghernouti Youcef, Rabehi Bahia, Mansour Sabria Malika (Author)

  180-188

  • pdf

• Experimental Analysis of the Punching Shear Behavior of Concrete Slabs Reinforced with Metal and Polypropylene Fibers

  Atlaoui Djamal, Bouafia Youcef, Khelil Nacim, Akkouche Karim, Aliche Amar (Author)

  189-199

  • pdf

• Probabilistic Fracture Mechanics Analysis of Crack Propagation in Composites Under Tensile Loading

  Sid Ahmed Reffas, Belaid Mechab, Mohamed Cherfi (Author)

  200-209

  • pdf

• Magnetic and Structural Behavior of Nanocrystalline Iron-Silicon and Iron-Tin Produced via Mechanical Milling

  Abderahim Abada, Abderrahmane Younes, Rachid Amraoui, Djilali Allou (Author)

  210-216

  • pdf

• Development and Characterization of Epoxy-Based Laminated Composites: Experimental Characterization and Numerical Simulation

  Ghermaoui Ilias Mohammed Amine, Ezzine Mohammed Chams Eddine, Mokhtari Mohammed, Cherief Mohammed Nadhir Djamel Eddine, Cherfi Mohamed, Sahli Abderrahmane (Author)

  217-225

  • pdf

• Computational Materials Design: Tuning Optoelectronic Response in GaxIn1-xBiyP1-y Alloys via Structural Matching to InP

  Malika Tehami, Miloud Benchehima, Hamza Abid (Author)

  226-243

  • pdf

• Swarm Intelligence-Based Energy Optimization for UAV Mission Efficiency

  Mustafa Cosar (Author)

  244-256

  • pdf

• Study and Design of a Plasma Reactor Using a Porous Dielectric Barrier

  Fatha Tounsi, Rabah Ouiddir, Houcine Miloudi, Mohamed Miloudi, Abdelber Bendaoud (Author)

  257-263

  • pdf

• Effect of the Strain Rate and Temperature on the Shape Memory Behavior of PMMA

  Cherief Mohammed Nadhir Djamel Eddine, Ghermaoui Ilias Mohammed Amine (Author)

  264-275

  • pdf

• Deterministic Assessment of the Seismic Behavior of Cylindrical Steel Storage Tanks: A Methodological Framework Based on the New Algerian Seismic Code

  Amar Aliche, Ourdia Ider, Mouloud Guemmoun, Hocine Hammoum, Karima Bouzelha, Djamel Atllaoui (Author)

  276-282

  • pdf

• Investigation of the Possibility of Introducing Dispersed Boron Carbide Particles into the Melt of Austenitic Steel 12X18H10T During Centrifugal Casting

  Abdrakhman Naizabekov, Sergey Kuzmin, Ilya Chumanov, Andrey Anikeev, Vadim Sedukhin, Evgeniy Panin, Andrey Marukov (Author)

  283-288

  • pdf

• Modelling of Distribution of Ultradisperse Particles of Titanium, Tungsten and Zirconium Carbide During Centrifugal Casting

  Ilya Chumanov, Andrey Anikeev, Abdrakhman Naizabekov, Sergey Lezhnev, Pavel Tsyba, Dmitry Kuis (Author)

  289-295

  • pdf

• An AI-Based Method for Sorting and Separation of Semiconductor Waste: An Environmentally Friendly Method for Implementing a Circular Economy in the Semiconductor Industry

  Gharib Hadj (Author)

  296-306

  • pdf

• Studying the Temperature Effect on Lengthwise Fracture of Inhomogeneous Beam Subjected to Impact Loading

  Victor Rizov (Author)

  307-315

  • pdf

• Effects of Elastic Deformation on the Corrosion of 316l in 3.5% Nacl

  Allou Djilali, Amraoui Rachid, Djemmah Sarra, Benmohamed Manel, Younes Abderahman, Abada Abderahim (Author)

  316-322

  • pdf

• Best-Fitting Ellipsoid and Surface Disturbance Adjustment of GNSS-Derived Sea Surface Heights

  Konstantinos Kalimeris, Sotiris Lycourghiotis (Author)

  323-329

  • pdf

• Computer Modeling and Investigation of the Rolling Process of Thick Strips in Relief Rolls Under Conditions of Kinematic Asymmetric Interaction

  Yevgeniy Panin, Valery Chigirinsky (Author)

  330-336

  • pdf

• Eco-Friendly Recovery Method for Manufacturing Flexible Paver’s Tile Construction from Waste Plastics

  Roua'a K. Al-Ojar, Yonis Ahmed Ismael, Akram. W. Nayyef, Ghadeer Amer Muhamed, Fawzi Habeeb Jabrail (Author)

  337-348

  • pdf

• Adaptive Hybrid Reduction for Facial Recognition

  Djamel Berrabah, Yacine Gafour (Author)

  349-353

  • pdf

• Enhancing OFDM Performance Using Wavelet Transform Techniques in Wireless Systems

  Zohra Zerdoumi, Malika Fodil, Fadila Benmeddour, Nacerddine Bentaleb (Author)

  354-360

  • pdf

• A Multi-Criteria Weighted Clustering Protocol for Energy-Efficient Overlay Wireless Sensor Networks

  Taieb Brahim Mohammed, Abbad Houda, Abbad Leila (Author)

  361-373

  • pdf

• Speed Control of the Pentaphase Asynchronous Machine: Comparative Study Between Vector Control with Conventional PI and Fuzzy PI

  Fodil Malika, Zerdoumi Zohra, Zemouri Nahed, Benmeddour Fadila (Author)

  374-381

  • pdf

• Research Trends in the Heat Transfer Simulation of Al₂O₃/AlN Granular Composites for Thermal Interface Materials

  Senlau Sudarminto (Author)

  382-392

  • pdf

• Influence of Boundary Conditions of a Contact Problem on the Stress Distribution in a Semi-Infinite Space

  Valery Chigirinsky, Sergey Lezhnev, Sergey Kuzmin, Abdrakhman Naizabekov, Yevgeniy Panin (Author)

  393-400

  • pdf

• Impact of Printing Orientation on the Mechanical Properties of Selectively Laser Sintered PA12

  Boukhoulda Farouk Benallel, Djellal Kouider, Bendine Kouider, Boukhoulda Abdelaziz (Author)

  401-414

  • pdf

• Performance and Efficiency of Redesign Induction Motor Using Asymmetric Windings

  Hussein G. Abdulkareem, Ennam A. Ali (Author)

  415-422

  • pdf

• Synthesis and Characterization of Biochar and Nano-Biochar Composites Derived from Biomass (Colutea cilicica) for the Removal of Cationic Dyes from Aqueous Solutions

  Erol Pehlivan, Busra Ozkok (Author)

  423-432

  • pdf

• Factors Affecting the Sliding Stability of a Gravity Retaining Wall

  Karim Baziz, Amar Kahil (Author)

  433-443

  • pdf

• A Decade of Research on Biomass Materials in Residential Building Construction: A Bibliometric Analysis

  Yudith Arunika C. Wella (Author)

  444-458

  • pdf

• Application of Ultrasonic Spectral Analysis for the Study of Steels

  Yonka Ivanova, Todor Partalin, Boris Velev (Author)

  459-469

  • pdf

• Evaluation of Robust Controllers in Photovoltaic Systems: A Comparative Analysis

  Zerroug Nadjat, Behih Khalissa, Bouchama Ziyad (Author)

  470-479

  • pdf

• Nano Ideal Semi Alpha Generalized Continuous and Irresolute Mappings in Nano Ideal Topological Spaces

  Raja Mohammad Latif (Author)

  480-501

  • pdf

• Synthesis of Stoichiometric Cordierite Ceramics from Chemically Modified Kaolin by a Controlled Acid Leaching

  Boumchedda Khaled, Djafar Rabah, Rabehi Bahia, Bououdina Mohamed (Author)

  502-511

  • pdf

• AI-Driven Molecular Design: Synergizing Deep Generative Models with Evolutionary Optimization

  Abbad Houda, Taieb Brahim Mohammed, Oulladji Latefa, Abbad Leila (Author)

  512-524

  • pdf

• Performance of LTO/rGO Composite Anode in Lithium Ion Battery

  Meltem Cayirli, Busra Yilmaz-Donmez, Mustafa Anik (Author)

  525-529

  • pdf

• Effect of Friction Stir Welding Parameters on the Evolution of the Welding Temperature

  Belaribi Amina, Miloudi Abdelkader, Chekalil Ismail, Benmessaoud Mohammed Abdelghani (Author)

  530-537

  • pdf

• From Data to Emotion: A Multimodal Approach to Real-Time Emotion-Aware Marketing

  Alper Bozkurt, Furkan Ekici, Hatice Yetiskul, Hüseyin Oktay Altun, Emre Fisne (Author)

  538-550

  • pdf

• Effect of Fiber Orientation on Tensile Property of Basalt Reinforced Epoxy Composite

  Yusuf Sahin, Selahettin Selek (Author)

  551-558

  • pdf

• Punch Geometry and Burr Height on Blanking Process for Garbage Container Wheel Parts

  Ilyas Uygur, Halit Kocasungur, Sitki Akincioglu, Hasan Oktem (Author)

  559-566

  • pdf

• Effect of Cryogenic Treatment on the Microstructure of AlSi10Mg Alloy Produced by Selective Laser Melting

  Pelin Sezer, Gamze Ertas, Hakan Gasan (Author)

  567-574

  • pdf

• Investigation of Borophene Synthesized via a Scalable Approach as an Anode Material for Lithium-Ion Batteries

  Suleyman Can, Cihan Kuru (Author)

  575-579

  • pdf

• Geological and Geotechnical Perspectives on Seismic Hazard Assessment of Landslides

  Liliana-Irina Stoian, Elena Aurelia Tudor, Antonio Ulmeanu, Avram Ovidiu, Ioan Scutelnicu, Adrian Tataru (Author)

  580-589

  • pdf

• Compact Single-Switch Reconfigurable Patch Antenna with Multi-Band Operation for Wireless Systems

  Frouda Nour El Houda, Berkat Abdellatif, Azzaz Rahmani Salima (Author)

  590-596

  • pdf

• Influence of Site Class on the Dynamic Response of Regular Buildings Considering Soil-Structure Interaction

  Mohamadi Saddika, Boumaiza Malika, Berzane Sid-Ali, Bouamrirene Abdelhafid (Author)

  597-609

  • pdf

• Bearing Fault Detection and Severity Classification Using a Two-Step Neural Network Model

  Smail Haroun (Author)

  610-616

  • pdf

• RLS Filter Optimization for Non-Invasive Fetal Electrocardiogram Extraction Using the PSO Algorithm

  Mourad Benziane, Mohamed Rezki, Issam Griche, Kamel Saoudi, Abderrazak Arabi (Author)

  617-624

  • pdf

• Performance Evaluation of the Andasol-1 Solar Power Plant in Algerian Climatic Conditions

  Hicham Kadraoui (Author)

  625-629

  • pdf

• Engineering Next Generation Hole Transport Layers for Lead Free Perovskite Solar Cells Exceeding 23% Power Conversion Efficiency

  Souheyla Mamoun, Abdelkrim Elhasnaine Merad, Feryel Saidi (Author)

  630-640

  • pdf

• Energy Audit of a Community Center

  Slav Valchev, Nikola Valchanov (Author)

  641-654

  • pdf

• Generation Algorithms of Invertible Linear and Nonlinear Finite Automata with Memory

  Gulmira Shakhmetova, Khasenov Altay, Zhanat Saukhanova, Altynbek Sharipbay, Alibek Barlybayev, Raykul Sayat (Author)

  655-666

  • pdf

• Investigation of Corrosion Properties of Lead-Free Solder Alloys in 3.5% NaCl Solution

  Resat Can Ozden (Author)

  667-671

  • pdf

• Evaluation of Nonlinear Fracture Quantities in Lime-Pumice Mixtures

  Erkin Eren, Ragip Ince (Author)

  672-681

  • pdf

• Electrical Resistivity Tomography as a Tool for Geological-Engineering Assessment of the Benkovski-2 Tailings Storage Facility

  Maya Tomova, Atanas Kisyov (Author)

  682-687

  • pdf

• Voltage Total Harmonic Distortion Reduction in Multi-level Single-Phase Inverters using the SHE-PWM Technique with a TLBO Algorithm

  Smail Toufik, Boulouma Sabri, Seddaoui Naoual, Rahmani Hachemi (Author)

  688-698

  • pdf

• Measurement and Transmission of Process Parameters in GSM and IoT Network

  Goce Stefanov, Marija Cekerovska, Elena Zafirov, Todor Cekerovski (Author)

  699-711

  • pdf

• Experimental Development and Performance Analysis of a Parabolic Solar Concentrator for Desalination and Treatment of Complex Wastewaters

  Souad Khedache, Said Makhlouf, Gilles Lefebre, Bilel Seddi, Abdellah Haddadi (Author)

  712-720

  • pdf

• Factors Affecting Corrosion of Steel in Pipe Lines

  Haddad Abdelouahab, Zerroug Nadjat (Author)

  721-730

  • pdf

• Performance of NMC622 Cathode - LTO Anode Full Cell Lithium Ion Battery

  Meltem Cayirli, Ersu Lokcu, Resat Can Ozden, Mustafa Anik (Author)

  731-736

  • pdf

• Power System Stability Including Wind Farm with Statcom Based Pi Fractional Controller

  Issam Griche, Kamel Saoudi, Mourad Benziane, Abderrazak Arabi (Author)

  737-747

  • pdf

• LogSense: A Comparative Anomaly Detection Platform on Web Server Access Logs Using Multiple Algorithms

  Arda Ata Turkoglu (Author)

  748-756

  • pdf

• Enhancing Wireless Sensor Networks Performance by Integrating Particle Swarm Optimization with Intelligent Clustering Techniques

  Rafa Sami Braiber, Mussab Riyadh (Author)

  757-770

  • pdf

• B-Smart: A Robust Reputation Based Blockchain Scheme in Wireless Sensor Networks

  Farah Khedim, Nabila Labraoui, Ado Adamou Abba-Ari (Author)

  771-790

  • pdf

• Carbon Fabric-Reinforced Polymeric Composites Produced by Hand Lay-Up and Investigation of the Tensile Behavior

  Ozhan Sirin, Yusuf Sahin, Emir Can Omer (Author)

  791-797

  • pdf

• Dynamic Analysis of Vertical and Horizontal Irregular Reinforced Concrete Structure Considering Soil Structure Interaction

  Boumaiza Malika, Mohamadi Saddika, Sellam Mustapha, Tiliouine Wail (Author)

  798-806

  • pdf

• Effect of Variable Mass Density on Lengthwise Fracture in Functionally Graded Beams Moving in Horizontal Direction

  Victor Rizov (Author)

  807-815

  • pdf

• Retrofit Kit Design That Converts Industrial Locks into Electromechanical Smart Locks

  Selahattin Mert Aydin, Engin Gunes (Author)

  816-823

  • pdf

• Assessing Translation Quality in Large Language Models and Machine Translation Systems: The BLEU Metric and Language Pair Effects

  Philipp Rosenberger, Natallia Kolchanka (Author)

  824-829

  • pdf

• A Multi-Criteria Decision-Making Model for Performance Evaluation Based on PSI–PF-COBRA

  Canan Sen, Kubra Onder, Halil Sen (Author)

  830-841

  • pdf

• Evaluation of Composite Method Repair of a Cracked Plate

  Aida Achour, Belabbes Bachir Bouidjra, Hafida Driz, Sadek Bahar (Author)

  842-848

  • pdf

• A Bio-Inspired Path to Fake Profile Detection: Revisiting Linear Models through Grasshopper Optimization

  Nadir Mahammed, Imene Saidi, Mahmoud Fahsi, Souad Bennabi (Author)

  849-860

  • pdf

• Deep Learning-Based Crop Recommendation Using Soil and Environmental Parameters

  Fatma Ozge Ozkok (Author)

  861-870

  • pdf

• Development of a Computational Interface for the Thermal Behavior Analysis of Metallic Plates Using the Finite Volume Method

  Imene Bennia, Narimen Hamidi (Author)

  871-880

  • pdf

• Fabrication Process of Nano and Optoelectronic Devices Based on Nitrided Gaas: XPS Analysis and Electrical Measurements

  Arslane Hatem Kacha, Ahmed Hichem Yahi, Boudali Akkal, Zineb Benamara (Author)

  881-890

  • pdf

• A Novel Triple-Band Band-Pass Metamaterial Filter based on Modified Square Split Ring Resonators for Microwave Applications: Design and Analysis

  Zoubir Mahdjoub, Mohammed Berka (Author)

  891-898

  • pdf

• Analysis of the Aerodynamic Characteristics of Wing Profiles

  Brahim Rostane (Author)

  899-904

  • pdf

• Study of the Effect of InP (100) Nitridation Time by XPS Analysis and Electrical Characterisation

  Talbi Abbassia, Benamara Mekki Abdelkader, Chami Nadir, Zineb Benamara (Author)

  905-911

  • pdf

• Smart Control of Vibrations in Functionally Graded Porous Wind Turbine Blades via Piezoelectric Materials

  Khalid El Harti, Mohamed Touil, Rachid Saadani, Rahmoune Miloud (Author)

  912-920

  • pdf

• Elaboration and Characterization of Transparent Conductive Oxide Thin Films and the Effect of Doping

  Ahmed Hichem Yahi, Arslane Hatem Kacha (Author)

  921-927

  • pdf

• C-V and G-V Characteristics of Nitridated GaAs (100) Structures as Function of Frequency-Effect of Series Resistance

  Benamara Mekki Abdelkader, Talbi Abbassia, Toumi Hayet, Benamara Zineb, Benamara Fatima Yasmine Maroua (Author)

  928-934

  • pdf