Vol. 32 (2024)

Articles

• Fresh and Hardened Properties of Self-Compacting Concrete Reinforced with Recycled Steel Fibers from Mechanical Parts Turning Waste

  Sabria Malika Mansour, Youcef Ghernouti, Bahia Rabehi (Author)

  1-11

  • PDF

• Electrical Innovations in Electrocoagulation: Designing and Testing Prototypes for Sustainable Water Treatment

  Latroch Maamar, Aissa Bokhtachte Aicha, Badni Nadia (Author)

  12-18

  • PDF

• Computer Modeling and Study of the Influence of Pre-Heat Treatment and Radial-Shear Rolling on the Evolution of the Structure of 5KHV2S Steel

  Andrey Tolkushkin, Pavel Tsyba, Andrey Marukov, Abdrakhman Naizabekov, Yevgeniy Panin, Alexandr Arbuz (Author)

  19-24

  • PDF

• OCDMA Based Satellite to Underwater VLC Transmissions for Oceanic Monitoring

  Kandouci Chahinaz, Bouziani Merahi (Author)

  25-29

  • PDF

• Development and Characterization of Stabilized Earth Blocks Based on Recycled Sediment and Lightweight Aggregates

  Bahia Rabehi, Youcef Ghernouti, Sabria Malika Mansour, Khaled Boumchedda (Author)

  30-40

  • PDF

• ANSYS Creep Modeling in a Beam with a 45° of Opening Crack

  Ghouilem Kamel, Atlaoui Djamal, Mehaddene Rachid, Merakeb Seddik (Author)

  41-52

  • PDF

• Comparative Analysis of Three Converters Providing Power to a Discharge Lamp-electronic Ballast System Designed for Water Sterilization

  Aicha Aissa - Bokhtache, Maamar Latroch, Nadia Badni, Alla Eddine Toubal - Maamar, Lemya Djafer, Amina Merini (Author)

  53-65

  • PDF

• Effect of Preliminary Nitric Chemical Treatment on Corrosion Behavior of 316 Stainless Steel in Chloride Solution Contain Glucose

  Djedjiga Ben - Abdesselam, Nacer Zazi, Youcef Hadj - Ali, Fatah Hellal, Jean Paul Chopart, Mărioara Abrudeanu, Denis Negrea (Author)

  66-79

  • PDF

• Effect of Crystallite Size on Magnetic Properties of Nanostructured FeAlTiBZr Alloy

  Abderrahmane Younes, Nadia Metidji, Nacer Dilmi, Rachid Amraoui, Abderahim Abada (Author)

  80-85

  • PDF

• The Effect of Rehabilitation on the Vulnerability Evolution of an RC Water Tank throughout Its Lifecycle

  Amar Aliche, Karima Bouzelha, Ourdia Ider (Author)

  86-92

  • PDF

• Enhancing Analysis of Cross-Ply Laminated Composite Plates: A Simplified Approach for Flexural and Stability Evaluation

  Abdelmoumen Anis Bousahla, Hichem Bellifa, Abdeldjabbar Tounsi, Lakhdar Khelifa (Author)

  93-100

  • PDF

• Research of Combined Copper Processing Technology Including Heat Treatment and Radial-Shear Rolling

  Vladislav Pishchikov, Sergey Kuzmin, Valeriy Chigirinsky, Andrey Marukov, Abdrakhman Naizabekov, Irina Volokitina (Author)

  101-105

  • PDF

• Micro-Jet Control of Flow in NACA 4412 Wing

  Hocine Tebbiche, Mohammed Saîd Boutoudj (Author)

  106-115

  • PDF

• Effects of Micro-Blowing and Vortex Generators on the Boundary Layer Separation Control of a NACA 0015 Airfoil

  Mohammed Said Boutoudj, Hocine Tebbiche (Author)

  116-122

  • PDF

• Comprehensive Investigation of Structural, Electronic and Optical Properties of KBaP Using Density Functional Theory

  Aidouni Ahmed Amine, Ould - Mohamed Mounir, Aissat Abdelkader, Belbachir Souheil (Author)

  123-130

  • PDF

• Transfer Function Method for EMC High-Frequency Modeling of Electrical Machines

  Mohammed Hamza Bermaki, Houcine Miloudi, Mohamed Miloudi, Abdelkader Gourbi, Abdelber Bendaoud (Author)

  131-136

  • PDF

• Studying the Microstructure Evolution by Various Methods in the Development of New Combined Deformation Processes

  Yevgeniy Panin, Gulzhainat Akhmetova, Aibol Esbolat (Author)

  137-141

  • PDF

• Performance Evaluation of Radio Fingerprinting Localization

  Smail Medjedoub, Bilal Saoud, Mourad Benziane, Khaled Rouabah (Author)

  142-153

  • PDF

• Evaluating Polyetheretherketone (PEEK) as a Superior Alternative to Titanium in Middle Ear Implants: A Finite Element Modeling Study

  Omar Khatir, Abdelkader Benkhettou, Sidi Mohamed Fekih, Abderahmene Sahli, Ismail Boudjemaa (Author)

  154-159

  • PDF

• Tailored Support for Weight Loss: A Personalized Smartphone Application for Weight Loss

  Yara Oneissy, Melissa Waked, Ralph Al - Hassrouty, Marielle Mansour, Lama Bou - Farah (Author)

  160-172

  • PDF

• Numerical Damage Prediction of Marine Structures Reinforced by Composite Patch with XFEM and CZM Methods

  Harmel Mohammed Walid, Zouggar Kamel, Baghdadi Mohammed, Mhamdia Rachid (Author)

  173-184

  • PDF

• Multidimensional Analysis of Potential Cost-to-Cost Risks of Climate Disruption for Energy-Focused Facilities Using Remote Sensing, Drone Photogrammetry, and GIS Methods

  Muntaha Kassim Alzubade, Oyku Alkan (Author)

  185-193

  • PDF

• SWOT Analysis of Quantum Computing in Accounting

  Hamide Özyürek (Author)

  194-207

  • PDF

• Machine Learning Approaches for Bank Customer Churn Analysis

  Yasemin Bozkurt, Hasan Temurtas, Çiğdem Bakır (Author)

  208-229

  • PDF

• GraphQL: A Comprehensive Analysis of Its Advantages, Challenges, and Best Practices in Modern API Development

  Ina Papadhopulli, Hakik Paci (Author)

  230-237

  • PDF

• Design, Analysis and Manufacturing of Plastic Parts Made from Bio-Added Polymers

  Hasan Öktem, Halit Karasungur, Ali Oz (Author)

  238-243

  • PDF

• Comparative Analysis of RTK and Net-RTK Accuracy in UAV-Based Photogrammetry

  Öykü Alkan, Muntaha Kassim Alzubade, Mehmet Nurullah Alkan (Author)

  244-250

  • PDF

• Mechanical Auto Booting on Production Lines

  Kaan Pehlivan, Okan Temizturk (Author)

  251-256

  • PDF

• Green Supplier Selection with CoCoFISo-G

  Halil Sen, Mustafa Serdar Toksoy (Author)

  257-265

  • PDF

• Application of Transparent Insulation Materials on the Roof of a Building: A Case Study in North Cyprus

  Lida Ebrahimi - Vafaei (Author)

  266-274

  • PDF

• Prediction of Constituents of Concrete Mixtures Containing Fly Ash and Blast Furnace Slag Using Machine Learning Techniques

  Mohammed Jaradat, Mohammad Massoud, Ahmad Manasrah, Yousef Jaradat (Author)

  275-280

  • PDF

• A Numerical Approach to Predict the Flexural Response of Simply Supported Nonhomogeneous and Non-Slender Graded Beams

  Baya Allala, Abdelmadjid Si - Salem, Souad Ait - Taleb, Fatma Kheloui - Taouche, Soraya Ferhat (Author)

  281-287

  • PDF

• Determining the Optimal Conditions for Dropping a Load from an Aircraft

  Milen Atanasov (Author)

  288-294

  • PDF

• Significant Improvement in License Plate Recognition through Image Deduplication

  Djamel Berrabah, Yacine Gafour (Author)

  295-303

  • PDF

• Tackling FSO-WDM System Challenges with Artificial Neural Networks: A Comprehensive Analysis

  Rima Kebaili, Samia Driz, Benattou Fassi (Author)

  304-310

  • PDF

• Parallel Machine Scheduling with Re-entrant Jobs with Consideration of Set up Times

  Betul Kayisoglu, Seyma Bekli, Ayse Sena Sahin, Gamze Gul Akyurek, Ruveyda Aydinli, Sevda Nur Copur, Tugba Ekinci (Author)

  311-319

  • PDF

• Generalized Predictive Control of Multi-Phase Induction Machine Supplied by Multi-Level Inverter

  Bessaad Taieb, Khelifa Khelifi - Otmane, Sahraoui Hamza, Lekhal Djamel (Author)

  320-328

  • PDF

• Performance Evaluation of a Self-Compacting Mortar Altered with Dune Sand

  Nacim Khelil, Said Boukais, Randa Makkeb, Karim Akkouche, Amar Kahil (Author)

  329-335

  • PDF

• Automation of IMEI Label Attachment Process in Mobile Device Production

  Okan Temizturk, Kaan Pehlivan (Author)

  336-341

  • PDF

• Integrated Best-Worst Method and Gray Relational Analysis for Hospital Location Selection: The Case of Burdur Province

  Mustafa Serdar Toksoy (Author)

  342-352

  • PDF

• Evaluation of Glutathione-Related Antioxidant Enzyme Activity in Patients with Polycystic Ovary Syndrome (PCOS) and Investigation of Clinical Correlations

  Ali Hameed Mahmood Al - Qaysi, Sevki Adem, Omeed Akbar Ali - Ali (Author)

  353-359

  • PDF

• Removal of Carcinogenic Direct Azo Dyes from Aqueous Solution Using a Functional Biopolymer

  Lamia Moulahcene, Fadila Oughlis - Hammache, Ounissa Kebiche - Senhadji, Mohamed Skiba (Author)

  360-365

  • PDF

• Impact Assessment of Structural and Non-Structural Components on the Vulnerability Level of Reinforced Concrete Buildings

  Karim Akkouche, Aghiles Nekmouche, Nacim Khelil, Leyla Bouzid, Kahil Amar (Author)

  366-372

  • PDF

• Thermal Agitation Study on a 90° Surface of the Radius of Curvation of an Elbow

  Sofiane Maachou, Djezouli Moulai - Khatir, Abdeldjalil Benbakhti, Mohamed Mokhtari (Author)

  373-378

  • PDF

• Experimental Study of Acoustical Properties of Recycled Rubber Panels

  Yonka Ivanova, Todor Partalin (Author)

  379-388

  • PDF

• Simulation Study of Electronic Band Diagram Engineering and Electrical Parameters to Boost the Photovoltaic Performance of Novel Rb2PtI6 Double Perovskite Solar Cell

  Souheyla Mamoun, Abdelkrim El - Hasnaine Merad, Amina Benmansour (Author)

  389-399

  • PDF

• Magnetic Behavior and Structural Properties of Fe10Al40(ZnO)50 and Fe10Al50(ZnO)40 Nanocomposites

  Rachid Amraoui, Abderrahmane Younes, Abderahim Abada, Djilali Allou (Author)

  400-405

  • PDF

• Phases Unlocked: The Crucial Role of Qubit Phases in Quantum Computing

  Yousef Jaradat, Mohammad Masoud, Ahmad Mansrah, Ismael Jannoud, Mohammad Alia (Author)

  406-416

  • PDF

• Development and Characterization of a Biodegradable Composite Based on PLA Matrix and Date Kernels Powder

  Abdelouahab Ait - Kaci, Manel Hannachi, Mustapha Nechiche (Author)

  417-425

  • PDF

• Numerical Study of Tungsten Cathode Characteristics During TIG Welding

  Sayah Merazi, Leila Belgacem, Samira Benharat, Houria Kaddour, Mounir Sakmeche (Author)

  426-432

  • PDF

• Autopilot and Operator Assistance Systems for Wheel Loaders

  Mustafa Karahan (Author)

  433-438

  • PDF

• Design and Numerical Investigation of Highly Photovoltaic Efficiency of Novel Non-Toxic Double Perovskite Solar Cell with Igzo as Electron Transport Layer

  Abdelkrim El - Hasnaine Merad, Souheyla Mamoun, Abd - El - Illah Abbaci (Author)

  439-448

  • PDF

• Beyond One-Sided Solar Unlocking Efficiency and Space with Bifacial Photovoltaic Systems

  Ahmad Manasrah, Yousef Jaradat, Mohammad Masoud, Mohammad Jaradat (Author)

  449-454

  • PDF

• Effect of Porosity on the Nonlinear Thermal Stability of Functionally Graded Material Beams under Various Boundary Conditions

  Hichem Bellifa, Abdelmoumen Anis Bousahla, Abdeldjalil Benbakhti (Author)

  455-462

  • PDF

• Study of the Mechanical Properties and the Durability of Concrete Based on Recycled Wastes Aggregates

  Youcef Ghernouti, Bahia Rabehi, Sabria Malika Mansour (Author)

  463-475

  • PDF

• Assessment of Fatigue and Corrosion Effects on Coating from the SMAW Process

  Allou Djilali, Sarra Djemmah, Youcef Faci, Rachid Amraoui (Author)

  476-482

  • PDF

• Magnetic Control of Phase Evolution in Titanium-Based Alloys Synthesized by Ball Milling

  Abderahim Abada, Abderrahmane Younes, Rachid Amraoui (Author)

  483-487

  • PDF

• The Determinant of Cubic-Matrix of Order 2 and Order 3, Some Basic Properties and Algorithms

  Armend Salihu, Orgest Zaka (Author)

  488-514

  • PDF

• Spectrum Estimation of Spatial Velocity Component Pulsations

  Alexander Kusyumov, Sergey Kusyumov (Author)

  515-519

  • PDF

• The Effect of Recovery Fibers and the Sand/Gravel Ratio on the Direct Tensile Behavior of Concrete

  Atlaoui Djamal, Ghouilem Kamel, Bouafia Youcef (Author)

  520-531

  • PDF

• Investigation of the Effect of Combined Thermomechanical Processing on the Microstructure Evolution of CuZn23Mn7Fe4 Brass

  Sergey Lezhnev, Andrey Tolkushkin, Pavel Tsyba, Abdrakhman Naizabekov, Irina Volokitina, Alexandr Arbuz (Author)

  532-536

  • PDF

• Aspects of Influencing Factors in the Polishing of Plastic Optical Fibers

  Brindus Comanescu, Paul Schiopu, Marian Vladescu (Author)

  537-545

  • PDF

• Temperature Effect on the Creep Behavior of the Upstream Bituminous Concrete Masks of the Bouhnifia Dam

  Ghouilem Kamel, Atlaoui Djamal, Merakeb Seddik, Mehaddene Rachid (Author)

  546-559

  • PDF

• Clay Mineralogy of the Khabour and Akkas Formations, Akkas Field, Western Iraq: Implications for Reservoir Characterization and Paleoclimatic Conditions

  Rahma S. Al - Auqadi, Mohammad Aswad Al - Joboury, Ali I. Al - Juboury (Author)

  560-567

  • PDF

• From Concept to Reality: How 3D Printing Transforms Architectural Model-Making

  Bushra Zalloom (Author)

  568-574

  • PDF

• The Effect of High Temperatures on the Compression and Flexural Characteristics of Recycled Fiber-Reinforced Concrete

  Atlaoui Djamal, Bouafia Youcef, Ghouilem Kamel (Author)

  575-590

  • PDF

• Load Insertion Influence on the Hysteresis Loop of a Single-Phase Transformer under Transients

  Abdelghani Yahiou, Souhila Abdoun, Amar Maafa, Hacene Mellah, Badreddine Babes, Hamza Sahraoui, Hocine Terrab, Abdelhafid Bayadi (Author)

  591-603

  • PDF

• Analysis of Delamination in Statically Indeterminate Steric Frames Subjected to Fixed Support Rotation

  Victor Rizov (Author)

  604-610

  • PDF

• Numerical Computation of Turbulent Flow in a Square-Sectioned 90° Bend Using Open Foam

  Bouabdellah Abed, Mohammed Hamel, Abiddine Debab (Author)

  611-618

  • PDF

• Multi-Beat Digital Stethoscope

  Rebecca Dib, Daniel Al - Boutros, Lama Bou - Farah (Author)

  619-633

  • PDF

• A Novel Approach to Visible Light Communication: Combining OFDM and SrLa2Al2O7:Er³⁺ LED

  Halima Chahed, Benattou Fassi, Samia Driz (Author)

  634-641

  • PDF